Serving the San Jose area  ·  (669) 274-4795  ·  Open Mon-Sun 7am-7pm
📞 (669) 274-4795 Free Quote

Metal Roofing in Gilroy, CA (95020) · Local Professionals

San Jose Metal Roofing · Fast response in Gilroy and the San Jose area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+285Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gilroy is a town where the old downtown grid meets working farmland, and the roofs have to handle both. The 1920s bungalows and ranch homes off Monterey Street sit on long, narrow lots with mature trees, while the surrounding countryside is full of barns, sheds, and agricultural buildings that take a beating from the sun and winter storms. Whether you are near the Gilroy Gardens exit or out on a rural parcel toward San Martin, your roof is working harder than you think.

Homeowners in 95020 call us because we understand the local mix: corrugated panels on a shop building, a standing seam retrofit on a downtown cottage, or a simple leak repair after a windstorm. We know the difference between a Gilroy roof and a San Jose roof, and we price and build accordingly.

Metal Roofing in Gilroy (95020)

Gilroy sits in a valley that gets hot, dry summers and wet, windy winters. The housing stock reflects that: older single-story homes with low-slope porches, ranch houses with composition shingles that are nearing the end of their life, and a growing number of agricultural and commercial buildings that need durable, low-maintenance roofing. The soil here is a mix of clay and sandy loam, and drainage matters. On older downtown lots, narrow side yards and mature trees can make access tight, so we plan material staging carefully. On rural properties, we often deal with longer driveways, outbuildings, and the need for roofing that can handle dust, sun, and the occasional fallen limb.

Our team has worked throughout Gilroy and the surrounding Santa Clara Valley, from the historic downtown to the newer subdivisions off Chestnut Street and the farm country along Highway 152. We know the local building department, the inspection timelines, and the kinds of roofing that hold up here. Whether it is a small repair or a full replacement, we bring the same approach: solid materials, clean workmanship, and no surprises.

Our services in Gilroy

How a Job Works in Gilroy

Step 1: You call us at (669) 274-4795 or request a free estimate online. We schedule an on-site assessment at your Gilroy property, usually within a day or two. We inspect the roof, take measurements, check the attic and flashing, and talk with you about what you are seeing and what you want. You get a written estimate with clear pricing and options, no pressure.

Step 2: Once you approve, we pull the necessary permits from the City of Gilroy and schedule the work. On older downtown homes, we plan for tight access and protect landscaping. On rural or agricultural buildings, we coordinate around your schedule and any animals or equipment. We keep you informed about the timeline and any surprises we find under the old roofing.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and the roof is watertight.

Pricing for metal roofing in Gilroy depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical single-story ranch home, corrugated and ribbed panel roofing starts around $5.50 per square foot, while standing seam runs from $10 per square foot. A full replacement with metal shingle or stone-coated steel starts around $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits how many layers you can have. Smaller jobs like leak repairs start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what to expect before we start. Call (669) 274-4795 to schedule yours.

My 1950s ranch house near downtown Gilroy has a low-slope roof. Can you install metal over it?
Yes, we can often install a metal roof over a low-slope roof, but it depends on the structure and the existing layers. We will inspect the framing and sheathing during our free estimate. For low-slope applications, we typically recommend a standing seam or a corrugated panel with the proper underlayment. We will also check if your roof has the maximum number of layers allowed by the City of Gilroy before recommending a retrofit.
A winter storm just blew some panels loose on my barn off Highway 152. How fast can you respond?
We prioritize storm damage repairs and can usually get a crew out to Gilroy within 24 to 48 hours after you call. For emergency situations, call us at (669) 274-4795 and we will do our best to secure the roof quickly to prevent further damage. We handle insurance documentation and can provide a detailed report for your claim.
What is the typical cost for a metal roof replacement on a 1,500 square foot home in Gilroy?
For a 1,500 square foot home, a basic corrugated panel roof might start around $8,000 to $10,000, while a standing seam roof could range from $15,000 to $20,000. These are ballpark figures and depend on the pitch, access, and whether we need to remove existing layers. We provide a free, detailed estimate after inspecting your property.
Do I need a permit from the City of Gilroy for a metal roof replacement?
Yes, a building permit is typically required for a full roof replacement in Gilroy. The exact requirements and fees vary, so we always check with the City of Gilroy Building Department before starting work. We handle the permit application and inspections for you as part of our service.
My neighbor and I share a property line, and I want to replace my roof. Do I need their permission?
If your roof does not cross the property line, you generally do not need your neighbor's permission. However, if scaffolding or materials need to be placed on their property temporarily, it is courteous to let them know. For homes in a historic district or HOA, you may need design approval before starting. We can help you navigate those requirements.
Are you fully insured for roofing work in Gilroy?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We are happy to provide a certificate of insurance upon request so you can verify our coverage before work begins.
What maintenance does a metal roof need in Gilroy's climate?
In Gilroy, metal roofs should be inspected annually, especially after winter rains. Check for loose fasteners, debris buildup in valleys, and any signs of rust or coating wear. We recommend cleaning gutters and removing leaves and branches that can trap moisture. A quick inspection in the fall can prevent leaks during the rainy season.
Why choose us?

Trusted professionals in San Jose

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Jose

All your work handled by qualified professionals in San Jose

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

285+ Verified Client Reviews in San Jose

⭐⭐⭐⭐⭐ 4.9/5 · 285 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Jose · Response within 24h · No commitment · ☎ (669) 274-4795

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Jose ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm