Serving the San Jose area  ·  (669) 274-4795  ·  Open Mon-Sun 7am-7pm
📞 (669) 274-4795 Free Quote

Metal Roofing in Sunnyvale, CA (94085) · Local Professionals

San Jose Metal Roofing · Fast response in Sunnyvale and the San Jose area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+285Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sunnyvale is Eichler country, and that changes how a roof gets done. The flat and low-slope rooflines in neighborhoods like Fairbrae and Raynor Park, plus the ranch homes off El Camino Real, leave little margin for error when it comes to seams, flashing, and drainage.

Homeowners in 94085 call San Jose Metal Roofing because we understand mid-century roof geometry and the way summer UV and winter atmospheric-river storms test it. From the Cherry Orchard area to the streets near Washington Park, we install and repair metal roofs that fit the house instead of fighting it.

Metal Roofing in Sunnyvale (94085)

Sunnyvale sits on the flat valley floor between the Santa Cruz Mountains and the baylands, and that shows up in the housing stock. Eichler homes and similar mid-century moderns have low-slope or nearly flat roofs with wide overhangs and minimal pitch, so standing seam panels and carefully layered underlayment matter more than curb appeal alone. The older ranch homes closer to downtown often have gabled roofs with mature trees overhead, which means debris, moss, and shaded moisture are regular concerns. Tight lots and zero-lot-line properties near the Sunnyvale Caltrain station and Murphy Avenue make staging and panel handling a logistical puzzle, and we plan for that before the first panel comes off the truck.

Our team has worked across Santa Clara Valley for years, from the Eichler tracts of Sunnyvale to the tile and composition roofs of Willow Glen and Cambrian Park. We know how local heat bakes a roof, how winter rain finds failed fasteners, and how to keep a low-slope roof moving water away from the house. We are fully insured with general liability and workers' compensation, and we pull permits through the City of Sunnyvale so the work is inspected and documented.

Our services in Sunnyvale

How a Job Works in Sunnyvale

Step 1: You call (669) 274-4795 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the attic if accessible, and talk through what you are seeing. You get a written scope and a clear price before any work starts, and we answer questions about panel profiles, color, and how the roof will shed water in a low-slope situation.

Step 2: Once you approve, we handle the City of Sunnyvale permit and schedule the crew. On tight Eichler lots and zero-lot-line properties, we stage materials carefully and protect landscaping and neighboring fences. For homes under HOA design review, we provide the panel profile and color submittals your board needs. We remove the old roof, inspect and repair sheathing, install underlayment and flashing, and set the new metal roof with fasteners and seams suited to the slope.

Step 3: We clean up daily and do a final walkthrough with you. Magnets sweep the yard for fasteners, gutters are cleared of debris, and we show you the finished roof and the workmanship details. You get documentation for your records, and we leave the property as clean as we found it.

Pricing in Sunnyvale depends on roof size, slope, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles retrofit at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, while copper and specialty metal start at $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, flashing and chimney or skylight repair at $600, and gutters for metal roofs at $9 per linear foot. Low-slope Eichler roofs and tight lots can add labor, and storm damage may need temporary protection first. Call (669) 274-4795 for a free estimate with real numbers for your property.

My Eichler in the Fairbrae neighborhood has a low-slope roof. Can you install standing seam without changing the look?
Yes. We use standing seam panels with concealed fasteners and carefully detailed underlayment on low-slope sections, and we keep panel profiles low so the clean mid-century lines stay intact. We also check drainage and flashing at the wide overhangs, which is where low-slope roofs in Sunnyvale tend to fail first.
A storm just lifted panels on my roof near Washington Park. How fast can you respond?
Call (669) 274-4795 and we will schedule an inspection, usually within a day or two for active damage. We can secure or tarp the area to prevent further water intrusion, then document the damage for your insurance claim. We never promise coverage, but we do provide the photos and written scope your adjuster will ask for.
What does a typical metal roof replacement cost for a ranch home in 94085?
Most ranch homes in Sunnyvale fall in a range that starts around $9 per square foot for replacement, with the total driven by square footage, roof complexity, and whether we find sheathing damage. Standing seam and stone-coated steel run higher. We give you a fixed written price after the free inspection, so you are not guessing.
Do I need a permit from the City of Sunnyvale for a metal roof replacement?
In most cases yes, a re-roof or full replacement requires a permit, and the City of Sunnyvale sets the thresholds, fees, and inspection schedule. We pull the permit for you and coordinate the inspections. Rules can change, so we always confirm current requirements with the city before work begins.
My HOA requires approval for a new roof color. Can you help with that process?
We can. We provide panel samples, color chips, and a written description of the profile and finish for your HOA submittal. If your property line runs close to a neighbor, we also keep staging and drainage on your side of the line and document the roof layout so there are no surprises.
Are you insured for work on my Sunnyvale property?
Yes. That protects you if anything goes wrong on the job and covers our crew while they are on your roof.
What maintenance does a metal roof need in Sunnyvale's climate?
With long dry summers and winter rain, the main tasks are clearing tree debris from valleys and gutters, checking fasteners and sealant at flashings once a year, and washing off dust and leaf tannin that can dull the finish. Homes under live oaks or redwoods need more frequent debris checks. We offer inspections and coating or painting to extend the life of the roof.
Why choose us?

Trusted professionals in San Jose

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Jose

All your work handled by qualified professionals in San Jose

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

285+ Verified Client Reviews in San Jose

⭐⭐⭐⭐⭐ 4.9/5 · 285 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Jose · Response within 24h · No commitment · ☎ (669) 274-4795

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Jose ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm