Serving the San Jose area  ·  (669) 274-4795  ·  Open Mon-Sun 7am-7pm
📞 (669) 274-4795 Free Quote

Metal Roofing in Palo Alto, CA (94304) · Local Professionals

San Jose Metal Roofing · Fast response in Palo Alto and the San Jose area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+285Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Palo Alto is a city of tree-lined streets, from the Eichler neighborhoods near Greer Park to the Craftsman bungalows around University Avenue, and every roof here has to handle big canopies of oak and redwood dropping debris year-round. The mix of low-slope mid-century roofs and steeper Spanish-style tile means we see a little of everything, often on the same block.

Homeowners in 94304 call us because we know how to work around tight driveways, mature landscaping, and the fussy design review that comes with some of Palo Alto's older neighborhoods. When a storm knocks a limb onto a roof near the Baylands or a seam opens up in the heat, we're the crew that shows up with the right panels and the insurance to back it up.

Metal Roofing in Palo Alto (94304)

Palo Alto sits between the bay and the foothills, so roofs here face a split personality: dry, baking summers that cook asphalt and loosen fasteners, then atmospheric river storms that drive rain sideways into flashing and seams. The city's housing stock runs from 1920s Spanish Revival near downtown to 1950s ranch homes in Barron Park and mid-century Eichlers in the Greenmeadow tract, many with low-slope roofs that need careful panel layout and drainage planning. Big live oaks and redwoods hang over lots in Old Palo Alto and Professorville, dropping leaves and small branches that clog gutters and trap moisture against metal. We regularly pull packed debris from valleys and re-fastener panels that have worked loose after 20-plus years of thermal cycling. On the hillside edges near Foothill Expressway, ember risk from wildfires is real, and we install ember-resistant flashing and gutter guards to match. Tight lots mean we often stage materials on the street and hand-carry panels to avoid crushing landscaping.

Our team has been working these neighborhoods for years, and we've learned the local quirks: which streets have alley access, where the historic review kicks in, and how to protect mature fruit trees while we work. We're fully insured with general liability and workers' compensation, so you're covered if anything goes wrong on a tight Palo Alto lot.

Our services in Palo Alto

How a Job Works in Palo Alto

Step 1: Call us at (669) 274-4795 or request a free estimate online. We'll schedule an on-site assessment, usually within a couple of days, and walk the roof with you to identify problem areas, discuss panel profiles and colors that fit your home's style, and answer questions about permits and HOA rules if they apply. You'll get a written estimate with clear line items, no pressure.

Step 2: Once you approve, we handle the permit application with the City of Palo Alto Building Department (they typically require a permit for full re-roofs, and historic districts may have design review). We order materials, schedule delivery, and protect your landscaping with tarps and plywood runners. On installation day, our crew removes the old roofing, inspects and repairs the decking, and installs the new metal roof with manufacturer-specified fasteners and flashing. For Eichlers or low-slope roofs, we pay extra attention to seam placement and drainage to avoid ponding.

Step 3: After the last panel goes down, we do a thorough cleanup, magnet-sweep the yard and driveway for nails, and walk the finished roof with you to point out details and answer any last questions. We don't consider the job done until you're satisfied and your property is as clean as we found it.

Pricing for metal roofing in Palo Alto depends on the size and complexity of your roof, the material you choose, and access. As a ballpark, corrugated or ribbed panel roofing starts around $5.50 per square foot, metal shingles and stone-coated steel around $9 per square foot, and standing seam from $10 per square foot. A typical ranch home in Barron Park might run $18,000 to $28,000 for a full replacement, while a larger Eichler with low slope could be higher. Repairs like leak fixes or flashing work start at $450, and screw replacement or re-fastening from $750. Free estimates are always available, so call (669) 274-4795 and we'll give you a realistic number for your specific roof, not a vague guess.

My Eichler in Greenmeadow has a low-slope roof with tar and gravel. Can you install metal over it or do you have to tear off?
We usually recommend a full tear-off on low-slope Eichler roofs because the existing layers may be near the end of their life and hiding deck issues. Building code limits how many layers you can recover over, and on low-slope roofs, proper underlayment and ventilation are critical to prevent condensation. We'll inspect your deck during the estimate and give you both options with honest pros and cons.
A storm just dropped a huge oak limb on my roof near the Baylands. How fast can you get out for emergency repairs?
We prioritize storm damage calls and can often get a crew out the same day or next morning to tarp and secure the area. Call (669) 274-4795 and describe the damage; we'll schedule a free inspection and provide a written repair estimate. We also document the damage for insurance claims if you're filing one.
What's the typical cost to replace a composition shingle roof with standing seam on a 1,800-square-foot ranch home in Palo Alto?
For a 1,800-square-foot ranch with a simple gable roof, standing seam typically runs $22,000 to $30,000, depending on panel width, color, and whether we need to replace decking or add insulation. Access and landscaping protection can add a bit. We'll give you an exact quote after a free on-site measure.
Do I need a permit from the City of Palo Alto to replace my roof, and how long does it take?
Yes, the City of Palo Alto generally requires a building permit for a full roof replacement or re-roof. The process usually takes one to three weeks for plan review, and historic districts may require additional design review. We handle the paperwork and inspections for you, and we always defer to the current building department rules since they can change.
My neighbor's tree hangs over my property line and drops debris on my roof. Can I trim it, and will my HOA need to approve a metal roof color?
For HOA approval, many Palo Alto associations require design review for roof color and profile, so we can provide product samples and documentation to help with your application. We'll coordinate with your HOA if needed.
Are you fully insured for work on my Palo Alto home, including workers' compensation?
Yes, we carry general liability insurance and workers' compensation coverage for every crew member.
What maintenance should I do each year to keep my metal roof in good shape in Palo Alto's climate?
Clear leaves and debris from valleys and gutters, especially after fall and winter storms, and check for loose fasteners or lifted panels after heavy winds. We recommend a professional inspection every two to three years, and we offer free estimates for any needed repairs. Keeping trees trimmed back from the roof also helps reduce moss and debris buildup.
Why choose us?

Trusted professionals in San Jose

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Jose

All your work handled by qualified professionals in San Jose

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

285+ Verified Client Reviews in San Jose

⭐⭐⭐⭐⭐ 4.9/5 · 285 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Jose · Response within 24h · No commitment · ☎ (669) 274-4795

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Jose ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm